Glossary
The words printCAD uses, each as the app means it, with the guide that says more.
Array of copies. Linked copies of a body or a component placed along a line, round an axis, along a path or on a sketch's points, kept as one array that adds and removes its copies as its count changes. (Editing)
Assembly. The workbench that holds bodies together with joints, moves them, checks where they overlap and lists their parts. (Assembly)
Base solid. An imported, converted or repaired shape a body builds on: its first feature, after which ordinary features add to it and cut it. (Editing)
Body. One part: a solid (or a mesh, or sheets) with its own history of features and its own placement in the scene. (Editing)
Bought part. A body the parts list marks as bought rather than printed, which exports and the slicer leave out. (Printing)
Clipping plane. A plane that hides everything on one side of it, to look inside a part; it changes nothing. (Camera)
Component. A named group of bodies in the tree. A rigid one moves as one in an assembly; a flexible one lets its bodies move on their joints. (Assembly)
Configuration. A row of the configurations table: values for chosen variables, one row active at a time, so one document makes several sizes of a part. (Variables)
Constraint. A rule a sketch keeps: a length, an angle, two lines parallel, a point on a curve. The sketch moves its geometry until every rule holds. (Sketcher)
Cosmetic thread. A thread drawn on a round face and named in the parts list and exports, without being cut into the solid. (Holes)
Coupling. A tie between two joints' motions: gears, a belt, a rack and pinion, a screw. (Assembly)
Datum. A plane, line, point or coordinate system placed to build on, attached to what it was made from and following it. (Editing)
Drive. A hinge's or slider's motion held at a value or kept between limits, which the assembly can sweep through. (Assembly)
Edit session. Working inside one feature, such as a sketch, with the view square to its plane until it is closed. (Sketcher)
Faceted. A solid converted from a mesh whose curved areas are still the mesh's flat facets; Refine shape finds its round faces. (Document model)
Feature. One step of a body's history: a sketch, a pad, a hole, a fillet. Editing a feature rebuilds everything after it. (Editing)
Formula. An expression that sets a number, such as
Plate.width / 2, worked out again whenever what it reads
changes. (Variables)
History. A body's features in the order they build it, top to bottom in the tree. (Editing)
Joint. A relation between two bodies in an assembly: faces mated, axes aligned, a hinge, a slider. (Assembly)
Kernel. The geometry engine that builds solids from features, meshes them for the view and reads and writes CAD files. (Architecture)
Linked copy. A body that takes another body's shape and follows its changes, placed where it stands; a mirrored copy takes it mirrored. (Editing)
Linked part. A body whose shape is read from another printCAD file, refreshed when that file changes. (Editing)
Mesh body. A body made of triangles only, from an STL, OBJ, 3MF or similar file. It draws and exports; Convert to solid makes it take features. (Editing)
Package. A workbench someone else wrote, installed from a file or a GitHub address and run in a sandbox with only what you allow it. (Workbench packages)
Parts list. The table of bodies an assembly is made of, with counts, material, filament mass and what is bought. (Assembly)
Pick. What a click in the view takes: a face, an edge, a vertex or a whole body. (Editing)
Print layout. The parts laid flat on the printer's bed, plate after plate, for export and the slicer, without moving the bodies. (Printing)
Profile. A sketch's closed areas, which a pad, pocket or revolution takes. (Sketcher)
Recipe. A whole part written as a script, which the test suite runs. (Scripting)
Refine. Merging the faces a feature leaves split on one surface, so the solid has the faces it looks like it has. (Document model)
Region. One area of a sketch bounded by its curves, which a feature can take on its own. (Sketcher)
Repair shape. Mending an imported shape the kernel's checker finds broken, before features are built on it. (Editing)
Scan. A mesh body that stands for a measured part: a
file from a 3D scanner, imported with scan = true or marked
with Use as scan in its menu. Its row carries a SCAN badge with its size
and point spacing. (Editing)
Stand-in. A shape kept for a body whose features do not build yet, such as an imported file's saved part, shown until they do. (Editing)
Task. The panel on the right while a feature or tool is being set up, with Done and Cancel in its header; the whole task is one undo step. (Editing)
Tip. The feature a body's history stops at: features after it are drawn faded and left out of the solid, and a new feature goes in after it. (Editing)
Variable set. A named group of variables formulas can read. (Variables)
Workbench. A set of tools for one kind of work: Design for solid features, the sketcher, surfaces, assembly, and any installed package. (Editing)