printCAD GitHub Download

A plate sized by variables and a configuration table

A plate whose outline and thickness come from a variable set, and a configuration table that switches between sizes. The rectangle's two sides are dimensioned (sketch.constrain with distance gives each side a length and returns the dimension's id), and doc.set_formula binds each dimension, by that id, and the pad's length, by its field name, to a formula. The configurations set only the variables made columns with config.add_variable; Size.thick follows Size.width in every one of them. Activating none puts the variables' own formulas back.

The test suite runs this block from an empty document, and its asserts check what it made.

pc.var.new{name = "Size"}
pc.var.set{set = "Size", name = "width", formula = "60 mm"}
pc.var.set{set = "Size", name = "depth", formula = "40 mm"}
pc.var.set{set = "Size", name = "thick", formula = "Size.width / 20"}

-- The outline's numbers are placeholders: the formulas set them.
local s = pc.sketch.new{plane = "XY", name = "Plate"}
local sides = pc.sketch.rect{sketch = s, x = 0, y = 0, width = 10, height = 10}
local wide = pc.sketch.constrain{sketch = s, kind = "distance", items = {sides[1]}, value = 10}[1]
local deep = pc.sketch.constrain{sketch = s, kind = "distance", items = {sides[2]}, value = 10}[1]
pc.doc.set_formula{id = s, parameter = wide, formula = "Size.width"}
pc.doc.set_formula{id = s, parameter = deep, formula = "Size.depth"}

local pad = pc.design.pad{sketch = s}
pc.doc.set_formula{id = pad, parameter = "length", formula = "Size.thick"}
local body = pc.doc.feature{id = pad}.body

pc.config.add_variable{variable = "Size.width"}
pc.config.add_variable{variable = "Size.depth"}
pc.config.new{name = "Small"}
pc.config.set{name = "Small", variable = "Size.width", value = "40 mm"}
pc.config.set{name = "Small", variable = "Size.depth", value = "20 mm"}
pc.config.new{name = "Large", like = "Small"}
pc.config.set{name = "Large", variable = "Size.width", value = "100 mm"}

-- The plate's extent along X, Y and Z, built as it stands.
local function size()
  assert(#pc.doc.rebuild() == 0, "the plate builds")
  local m = pc.doc.measure{body = body}
  return {m.max[1] - m.min[1], m.max[2] - m.min[2], m.max[3] - m.min[3]}
end
local function is(got, x, y, z)
  assert(math.abs(got[1] - x) < 1e-6 and math.abs(got[2] - y) < 1e-6
    and math.abs(got[3] - z) < 1e-6, table.concat(got, " x "))
end

is(size(), 60, 40, 3)
pc.config.activate{name = "Small"}
is(size(), 40, 20, 2)
pc.config.activate{name = "Large"}   -- like Small, but 100 wide
is(size(), 100, 20, 5)
pc.config.activate{}                 -- the variables' own formulas again
is(size(), 60, 40, 3)

local configs = pc.config.list{}
assert(#configs.columns == 2 and #configs.rows == 2)

This page's source